How To Fix A Gpu Stuck At 139Mhz In 2022 (Steps) - Guide

How To Fix A GPU Stuck At 139Mhz In 2022 (Steps)

How To Fix A Gpu Stuck At 139Mhz (Steps)

Wanna know how to fix a gpu stuck at 139mhz? Read further to know more.

The graphics card or video card is an important part of your computer and it is the most powerful component that is used in your PC. This article will tell you How To Fix A Gpu Stuck At 139Mhz (Steps). 

If you are using a laptop, then you may not be able to change your graphics card, but if you are using a desktop then it can be replaced by you. GPU Stuck At 139MHz. 

If you’re reading this, you might be experiencing one of the most frustrating issues with your GPU or graphics card. You can’t seem to get it to run at full speed, even though it’s plugged in and turned on. 

The problem could be that you have an old GPU or graphics card. Or it could be that your motherboard is not configured properly. Whatever the case may be, here are some ways to fix a GPU stuck at 139MHz.

You might be facing a problem with your graphics card, so if it is not working properly then it is better to get it replaced. You can easily fix this issue with the help of the following steps: 

Most people are using a graphics card on their computer for gaming and other purposes. If you are one of them, then you must be aware of the fact that the graphics card is not an easy thing to fix. The problem can happen due to many reasons and you mustn’t panic

Open The Case Of Your Computer

If you are using a laptop, then you need to open the laptop case first. You need to remove the battery and the hard drive as well as remove the RAM and the cooling fan.

Remove The CPU

You need to remove the motherboard and the CPU, but don’t remove the motherboard from the case yet.

Remove The RAM

If you have removed the CPU, then you can start removing the RAM from the motherboard. If you are using DDR3 RAM then you need to remove it.

Remove The Hard Drive

Once the RAM is removed, then you can remove the hard drive. If you are not able to remove the hard drive, then you can use a screwdriver to remove it.

Replace The Video Card

After removing the hard drive, then you can replace the video card. If you are using an old card, then you can replace it with a new one.

How To Fix A GPU Stuck At 139Mhz

Fixing A Stuck GPU At 139 MHz

This problem may occur due to a power supply problem or the motherboard itself. You need to check whether your power supply is connected properly or not. If your power supply is connected properly then it is better to check whether your motherboard is damaged.

  • You can easily fix this issue with the help of the following steps:
  • Remove the motherboard from the case
  • Remove the CPU and the RAM
  • Remove the hard drive
  • Check whether the power supply is working properly or not
  • If the power supply is not working, then you need to check whether the motherboard is damaged or not.
  • Replace the video card
  • Replace the video card with a new one and connect it to the motherboard.

Is The GPU Stuck At 139Mhz?

If your power management settings are set to high performance, outdated device drivers, too many background programs, or if you have corrupted system files, your computer’s graphics card may get stuck in the 139MHz range.

Outdated device drivers and background programs are some of the power management settings. The system files had been corrupted. The computer’s central processing unit is designed to work with the computer’s graphics processing unit. 

The performance of your computer can be negatively affected by an issue with the computer’s processor or graphics card. The processor gets overheated and the graphics card gets stuck at slow speeds. 

Settings For Power Management

Computers have a way of managing their power requirements while working efficiently to provide maximum performance with the amount of power they have. 

The computer consumes more power when it is set to operate in high-performance mode. This can cause the graphics card to get stuck at frequencies that are not in use. 

The power management settings should be turned from high-performance mode to balanced mode if you want to stop your graphics card from getting stuck at idling.

Drivers For Outdated Devices

The device drivers are one of the most common reasons for the graphics card to get stuck. When the drivers and software associated with the graphics card installed on your computer are outdated or incompatible with the existing version of Windows and BIOS of your computer, the graphics clock tends to get stuck. If you want to eliminate this issue, you have to uninstall the existing drivers and install the latest versions of the same drivers.

It is recommended that you do the installation from the website of the manufacturer. You should restart the system after the installation is complete. There is a chance that a pending Windows or BIOS update will cause the graphics card to get stuck at 139MHz. 

Before installing the latest version of the driver, it is advisable to check if any update is pending. The getting stuck issue can sometimes be partially triggered by a pending BIOS update.

Programs In The Background

The programs that are running in the background can cause the graphics cards to get stuck. These programs consume a lot of power even though they don’t appear on the desktop. As a result, the clock speed for those programs that need higher speed can’t be managed by the GPU.

Systems That Are Overheated

When the computer is not being used, the processor gets heated and the graphics card gets stuck at the computer’s unused power as a way to prevent it from crashing. An Afterburner is an ideal tool for keeping the system’s temperature in check and preventing the graphics card from getting stuck at 139MHz.

Corrupted Files On The System

The corrupt system files consume a reasonable amount of energy. This causes the graphics card to get stuck at a very high speed. You will need to run a system file checker to fix this. In the search bar, you can type the command prompt. You can type “SFC/scan now” in the command prompt window.

The command can be run with the help of the “enter” key. It can detect and repair files that have been corrupted. The battery performance mode should be turned to the recommended settings when you run the “System Diagnostic Toolkit” after this.

Some of the graphics cards that can get stuck at 139MHz are listed below.

Radeon RX 580

GTX 1070

GTX 1060

GTX 1080

Some people who have had the locking problem with their graphics card found that removing the power cords and the video card and the VGA card from the motherboards and fixing them back in place solved the issue. The power supply needs to be disconnected before you attempt this method.

What Are The Effects Of A GPU Stuck At 139Mhz?

It affects the computer’s performance and the user experience in several ways when the clock speed is stuck at 139MHz. The computer system’s graphics processing unit is used for a variety of purposes. 

Video editing, content creation, artificial intelligence, machine learning, gaming are some of the things it helps in. 2D and 3D rendering, video processing, rendering frame rates, and enhancing the quality of virtual reality in gaming are just some of the things the graphics card plays a broad role in.

As they work at higher frequencies, programs like battle.net won’t work as they use graphics cards for carrying certain functions. The quality of video streaming is affected by a stuck graphics processing unit clock speed.

There may be a lag in the graphics and video of the computer system as the system runs inefficiently and depicts poor screen resolution It will not be possible to run multiple programs with the same clock speed.

When the clock speed of the computer’s graphics card is stuck at a slower rate, the computer consumes more power. For the system to work efficiently, it is necessary to save power and use the graphics card to do so.

How To Fix A GPU Stuck At 139Mhz

How Do I Fix A GPU That Is Stuck At 139Mhz?

If you try the solutions given below, you will be able to fix the problem.

Use a software utility tool like Device Driver Uninstaller or Driver Sweeper to uninstall all the software and drivers linked with your computer’s graphics card. The drivers are responsible for controlling the fan speed and the clock on your computer.

Downloads for the latest versions of the drivers and software of your computer graphics card can be found here. The errors associated with old versions of the drivers will be eliminated when this is done.

If the updates of the drivers are downloaded, you should install the latest version of MSI Afterburner on your computer. There is a tool called Afterburner that checks the video capturing, monitors the performance of the graphics cards, and prevents overclocking on your computer. The Task Managers list should be opened in this case.

If you want to do this, type “MSConfig” in the search bar. Check the “Hide Microsoft” option if you click on the “Services” tab in the pop-up window. Go through the list of tasks and stop the ones that you don’t need to. The background programs can be interfering with the working of the graphics processing unit.

Right-clicking on your desktop will allow you to go to the “Manage 3D settings”. Turn off the “maximum performance” setting and then use the recommended setting in the “Power Management” tab. The components should be checked to make sure they are not getting overheated. This will fix the clock and make sure it doesn’t get stuck at 139MHz.

FAQs: How To Fix A Gpu Stuck At 139Mhz (Steps)

How do you fix an unstable GPU?

Updating to the latest drivers is what you should do for the graphics card. Make sure that all the drivers and software are up to date. It’s a good idea to check the usage and temperatures of all of your hardware. All of your internal connections should be checked if the problem continues.

Why is my GPU clock speed jumping?

Your graphics card is always adjusting to the workload with the help of the clock. Even if the computer is not being used, the active windows are constantly refreshed by Windows. The core/memory clock spikes up when there is a small interval of time. The clock drops back down to save power when the task is complete.

Why is my GPU stuck at 300MHz?

Incompatible drivers linked with the graphics card, a faulty power supply, and wrong power management settings are some of the reasons your graphics card may get stuck at 300MHz. There are issues with the PCB and a bad solder joint that could cause the graphics card to get stuck at 300MHz.

Conclusion

So, these were some easy steps that will help you to fix the problem. If you are still facing a problem with your graphics card then don’t worry as there are other ways to fix this issue

I hope you liked the post and if you face this problem then you can try these methods to fix it. I hope that this article helped you gain all the information you needed to know How To Fix A GPU Stuck At 139Mhz (Steps) thanks for reading!

Also Read:
How To Fix Macbook Pro/Air No Connected Camera Error In 2022
How To Fix A Loose Laptop Charging Port (STEPS) – Quick Guide In 2022

Reggie Burton is a technology expert with over nine years of experience in the field. He has worked extensively with both large and small businesses to help them optimize their tech infrastructure and improve their overall efficiency. Reggie is known for his calm demeanor and his ability to quickly assess a situation and find a solution. He is an invaluable member of any team, and his clients are some of the most satisfied in the business.

Leave a Comment