How To Fix RAM Slot Not Working In 2022 (STEPS)

How To Fix RAM Slot Not Working In 2022 (STEPS)

Looking to know How to Fix RAM Slot Not Working? Read further to know the same.

If you are facing any issue with your RAM slot, it might seem like a major problem that you should fix immediately. However, if you have the right information and you can follow some simple steps, you will be able to fix this problem on your own. In this article, we will show you How to Fix a RAM Slot Not Working. 

RAM Slot Not Working?

Random Access Memory is a type of temporary storage that a computer system uses to store data instead of relying on the cache on a computer chip or the hard drive. 

Since there are no moving parts, memory problems are much less frequent than other laptop problems. Due to this, memory issues are often not diagnosed or misdiagnosed. The majority of laptop computers have at least two RAM slots. 

The operating system wouldn’t recognize the RAM stick if one of them failed. You will need to test the RAM slots, which requires a working stick of RAM and patience, as you check the memory slots through trial and error.

Can RAM Slots Go Bad?

There is absolutely no doubt about it. A stick of RAM goes from the RAM slot to the board. The RAM slot on the board can eventually become faulty. When it is obvious that it has gone bad, your laptop will run slowly.

Due to the fact that RAM is a temporary place for the laptop to store data, many processes go through it in order to work, and even the performance of the processor is affected by the health of RAM.

The System Information might show that there isn’t as much RAM as there is in your system. When you know there is a stick of RAM in the bank 1 slot, it will show empty.

Check Installed RAM for Possible Errors

Before you open the laptop, make sure to get to the RAM modules. Windows has a built-in RAM diagnostic tool that you can use to check the modules. Go to the Start menu and type “mdsched.exe” without quotation marks.

Next time you boot up the laptop, choose whether you want to restart the machine or check the memory now. If there are no errors in the test, you can rule out the RAM sticks as the problem.

Inspect Individual RAM Slots

If you want to check the memory slots, place a stick of RAM into each one at a time. If your machine boots without any problems, you know that the memory slot is good.

If you want to repeat the process, power down your system and place the same stick of ram in the next memory slot. If you do the same thing with the second stick of RAM, you will be able to see that everything is working correctly. It should be powered down before changing the memory slots. If you do this, you will be able to confirm which slot is causing the issue.

Can RAM Slots Be Replaced

Once you have isolated the memory slot as the culprit. You can replace it if you so desire. It is a process that is best left to a professional with soldering experience. If it is not done properly, it can affect other parts of the computer system.

The life and function of your laptop will be affected by the cost and what it costs. Buying a whole new computer board is likely to be a better decision.

Can you fix a broken RAM slot?

It is not possible to fix a broken RAM slot. It will only be possible to replace it with a working RAM slot. The RAM slots on the computer’s board have a network of delicate wiring and soldering in and around the space. If you attempt to replace the broken RAM slot, the wiring will get damaged very easily.

How To Fix RAM Slot Not Working

How to Repair a Memory Slot

A memory slot in your computer is where you put your memory card. The temporary memory that the computer uses whenever it is turned on is referred to as the RAM. If the computer can’t detect a RAM card in one of your memory slots, you have to fix the problem immediately.

Step 1

If the problem is with the RAM slot, make sure it is not with the memory card. All devices that are connected to your computer should be unplugged and the computer should be opened. Refer to the manual of the computer for the specific steps to be followed when opening it.

Step 2

You need to remove the memory card from the RAM slot. If you want to do this, you have to use both hands. If you want to remove the card, pull it away from the slot. It’s a good idea to inspect the RAM card for any physical damage. To remove dust from the card, wipe it with a clean cloth. It’s a good idea to wipe the memory slot on your computer.

Step 3

The memory slot is where the RAM card should be placed. When the card clicks into place, press the card into the slot. To turn on the computer, connect the cables back into their slots and close the computer case.

Step 4

The computer should detect the memory if you turn it on. The computer does not detect the RAM card if the computer does not boot up. If the second memory card is detected by the computer, it’s time for you to uninstall the second memory card from the computer. 

Click “Start,” right-click “Computer” and then “Properties.” Under “System,” check the amount of “Installed Memory (RAM)” if it is not detected.

Step 5

If the card is detected, place the card in another memory slot on your board. The other memory slot is malfunctioning if this is detected. If you want to avoid further damage, don’t put any RAM card in it. 

The RAM card may be malfunctioning if it is not detected. There should be another RAM card in the slot. The slot is malfunctioning if there is a RAM card detected.

How To Fix RAM Slot Not Working

How to Remove a Stuck Memory Card

There are a wide variety of shapes and sizes for memory cards. Some machines have as many as seven different slots, which is why most computers have slots designed to accommodate these different types of cards. 

A stuck card is usually caused by slipping a memory card into the wrong slot or using an incorrect accessory. When it comes to retrieving a stuck card, it is usually easy to do.

Step 1

The computer should be turned off and unplugged. It’s never a good idea to work on electronic devices while they’re still powered up.

Step 2

If the card isn’t stuck, it’s time to make a change. There is a mechanism built into some machines to keep the cards from falling out. Next to the slot, look for buttons or holes. 

If you can locate a button, press it. If you find a hole, gently press in on it with a paperclip. Try to push the back of the card to release the mechanism if you find it either.

Step 3

The position and location of the stuck card can be determined with the flashlight.

Step 4

If you want to grab the chip, use a pair of needle-nose pliers. To make sure you don’t pull at an angle, pull straight back with mild pressure. If you squeeze too hard, you’ll cause damage to the chip.

Step 5

If the card is too far in, use a small flathead screwdriver to get the tweezers around it. If you can still see the top of the card, use the screwdriver to gently lift it up to a point at which you can reach it with a pair of tweezers.

Step 6

Once you have retrieved the card, make sure to look over it to make sure the parts are accounted for. Look for any cracks or damage when you check for the gold-colored prongs.

How To Fix RAM Slot Not Working

RAM slot not working after CPU upgrade

Compatibility issues may prevent your RAM slot from working after the upgrade. Sometimes, these compatibility issues can be solved by updating the bios, disabling PCI-e4 in the BIOS, or setting the RAM Frequency. If you can’t get anything to work, you’ll have to replace the processor with a new one that’s compatible with the installed specifications.

You can update the BIOS by going to the manufacturer’s website and entering the specifications of your system. Click the BIOS option if you want to enter the system. You can download and save the file on your computer.

Click the “Run as Administrator” option if you don’t want the file to be opened. If you follow the instructions, you will be able to update the BIOS. Pressing the key or combination of keys specified by your manufacturer will allow you to enter the setup to disable the PCI-E4 in the bios.

You can find the “Hardware” option in the setup and then change the option status to “Disabled” by using the arrow keys. You can save the settings and exit the setup by clicking on the “Save and Quit” option.

Other Possibilities

It’s often the case that RAM problems go undetected. They can also be mistaken for something else. The reason for the memory issue may not have anything to do with the RAM module or the RAM slot.

  • Since they both have to do with storage, MHD problems can look similar to RAM issues. Press the Windows button and “R” at the same time if you want to use a utility called CHKDSK to eliminate the storage drive. Press Enter if you want to type CHKDSK into the dialogue box. It will take some time for this process to be completed. It is possible that you will need to restart your laptop.
  • When using programs that are graphics-heavy, like games or modeling and rendering, you should only notice the problem with the RAM. It is possible that your graphics driver needs to be updated.
  • Any computer system’s performance is adversely affected by excessive heat. Purchasing a laptop cooler will help your laptop run smoothly, there are lots of ways to keep your laptop cool.
  • If you have pets, the dirt and dust in the air vent can act as a memory problem. It is possible to improve performance by keeping the airways clean.
  • It has been known that Viruses look like problems with RAM. Hardware issues are easy to diagnose as Viruses are easy to misdiagnose. It is a good idea to make sure your virus protection is up to date. Scans should be run on a regular basis.

FAQs: How To Fix RAM Slot Not Working

We’re going to answer a lot of the common questions about RAMs and slots.

What causes a RAM slot to go bad?

Dust accumulates so it’s usually the reason for it. Damage to the pins in the sockets is one of the most common reasons for the problem. A change in settings could resolve your problem if you are lucky.

Can a computer run without RAM?

When you start the computer, the BIOS loads into the memory. If the ram slot is damaged, you will not be able to use your entire computer until you fix it.

Can I put RAM in any slot?

The designated slot for RAM is where it will work. You should get a RAM that matches the slot you want to use if you have more than one RAM slot. If you are buying a pair of RAMs, they should match. This will make sure that the efficiency is 100%.

What happens if I put RAM in the wrong slot?

The performance won’t be great if it is the type of RAM that you use.

Can you use 2 different brands of RAM?

Yes, you have the ability to. Their form factor needs to be the same as well. This means that they should be either DDR2, DDR3, or DDR4. One cannot be DDR3 and the other DDR2 at the same time.


To fix a RAM slot that is not working, you will need to remove the cover of your computer. This process may vary depending on the make and model of your computer. Once you have located the RAM slots, use a small Phillips head screwdriver to remove the screws that hold the cover in place. 

Be careful not to lose any of these screws! Once you have removed the cover, locate the faulty RAM slot. This blog on “How To Fix A Ram Slot That Is Not Working ” would help you with this issue. 

Also Read:
Why Does My Computer Keep Blowing A Fuse? Simple Guide In 2022
Why Is My Lenovo Laptop Not Turning On? (Solved) 2022
How To Fix A Laptop Monitor That Keeps Going To Sleep (Steps 2022)

Reggie Burton is a technology expert with over nine years of experience in the field. He has worked extensively with both large and small businesses to help them optimize their tech infrastructure and improve their overall efficiency. Reggie is known for his calm demeanor and his ability to quickly assess a situation and find a solution. He is an invaluable member of any team, and his clients are some of the most satisfied in the business.

Leave a Comment