How To Screw Into Your CPU Cooler (Screws Are Stuck!) - 2022

How To Screw Into Your CPU Cooler (Screws Are Stuck!) – 2022

How To Screw Into Your CPU Cooler (Screws Are Stuck!) – 2022

Do you wanna know how to screw into your cpu cooler? You are in the right place. Read further to know more.

A CPU Cooler is a fan specifically designed to cool down your Processor. It’s just like any other fan, but it’s meant to generate more airflow and remove heat from your computer faster than the computer case fans that come with standard PC cases.

CPU Cooler fans have a life expectancy just like any other part that’s made to wear out. The average CPU fan usually lasts somewhere between 5 to 10 years for most users, then you’ll usually notice a huge difference in performance or your computer will crash unexpectedly while playing games or doing heavy-duty tasks such as rendering videos and photos.

In this article, we will show you How to Screw into your CPU Cooler (Screws are Stuck!).

Do You Need To Screw In The CPU Cooler?

This is a very common problem among users who are building their own computers or even those who have purchased pre-built desktops. One of the ways to mount your CPU Cooler onto your motherboard is to use screws or bolts. 

These are usually included with your CPU Cooler package when you buy it from the store, but sometimes they may get stuck inside your CPU Cooler fan. Trying to unscrew them will cause damage not only to the bottom metal plate that’s meant for screwing into place but also to the outer shell that surrounds your CPU Cooler fan itself. 

This is especially true if you’re trying to turn them while they’re stuck in between two large metal plates on either side of the outer shell of the CPU Cooler.

How To Screw Into Your CPU Cooler (Screws Are Stuck)

How To Screw Into Your CPU Cooler

Your CPU cooler screws are probably stuck and we will show you How to Screw into your CPU Cooler (Screws are Stuck!). By using the following steps, we can remove the metal plate and pull out your screws:

Step 1: Unplug Your PC

Start by unplugging your computer so nothing gets damaged while you’re fixing up this problem. If it’s an option, switch off the power supply unit as well before continuing on with these steps so no electricity is flowing through any of those parts anymore. 

If it’s not, don’t worry too much because as long as you’ve unplugged everything from its socket, then there shouldn’t be any damage to worry about.

Step 2: Get a Screwdriver

You need to get yourself a screwdriver, preferably one that’s small enough to fit into the crevice where your screws are stuck. A table or desk-sized flathead screwdriver should do just fine.

It doesn’t have to be an extremely slim or skinny model, but it needs to have a thin edge of metal so you can slide it in between the screw and the plate inside your computer case. 

The more objects you can wedge in there while you’re trying to turn the screws loose, the better off you’ll be because of their added help of resistance when trying to unscrew them from each other.

Step 3: Slide-In Your Flathead Screwdriver

Slide the flathead screwdriver in there and start to turn it. If you’re lucky, the screws should come loose pretty quickly and then you can pull them out easily afterward. You might need to apply a little more pressure than usual as you’re turning the screwdriver because of how tightly those screws were screwed into place.

Step 4: Unscrew Your CPU Fan

Unscrewing your CPU fan will either require removing some part of your computer case or loosening any other screws that may be holding down your motherboard and/or power supply unit (PSU). 

It’s best practice to remove wires first before attempting to unscrew anything else so they don’t get caught up in there by accident. You could damage cables or ruin wire insulation if you don’t remove them from where you’re going to be unscrewing.

Any computer case with side panels should have a latch on the inside that will let you easily open up the panel and get rid of it without having to unscrew anything else. 

In other cases, the latches might be at the back of your case or somewhere else near the top or front area which can be just as easy to do once you’ve opened it up through another means such as sliding off a side panel.

Step 5: Screw Your CPU Fan Back In Place

To finish up, simply screw your CPU fan back in place and reattach any other parts where they need to go. You should now be able to boot into Windows or restart your computer to check whether it’s working properly again.

If you’re still having problems, then it’s time to take your CPU Cooler fan out and inspect the tracks where your screws were stuck in place. This might mean cleaning them off or using a different screwdriver that has a slightly larger diameter attached to its end so that when you slide it back in there, it’ll have a better chance of moving around with the track instead of getting caught up in between all those grooves.

You can also purchase new screws from your favorite store if these ones are damaged beyond repair or stripped after trying to unscrew them out over and over again. A couple of small replacement screws should do just fine for any sort of CPU Fan repairs.

How Hard Should I Screw The CPU Cooler?

How To Screw Into Your CPU Cooler

Actually, it is a really difficult task to screw the CPU cooler. There are lots of things to be considered before starting the process. Firstly, do not put too much pressure on screws as it may damage the motherboard or scratch other components inside your PC case

You can use your fingers or hand for turning those screws back and forth. Also, you need to control yourself from screwing them too hard as there are chances that it may get stuck with the motherboard and during this situation, if you will apply extra force then definitely you have no option left except breaking the head of those screws.

If it gets broken then you have to face another problem which is a very tough job to remove broken pieces from the threaded hole of a socket so be careful at this point. Sometimes screws also get stuck with the motherboard or it gets broken so try to use a pair of tweezers to hold them tightly and remove them carefully with the help of a screwdriver.

Which Way Do You Mount A CPU Cooler?

If you are using a stock (built-in) CPU cooler then it is very simple to mount it. It comes with four holes in the motherboard and these screws will easily fit into those holes. 

You can also purchase an extra or upgraded aftermarket CPU Cooler for your computer system which has pre-applied thermal paste on its base so you do not need to apply the thermal paste before mounting.

You should make sure that all fans of the case are powered properly and there is no blockage inside your PC case because, in this situation, your CPU Cooler will get overheated due to lack of proper airflow in the case. Always put less pressure on these CPU coolers when screwing them as this may damage them completely.

How Hot Should My CPU Get Before I Need To Replace The Cooler?

CPUs normally run at around 50 degrees Celsius. If your CPU gets much hotter than 80 degrees Celsius then there is something wrong with the thermal compound between your processor and heatsink. 

Thermal paste might be dried out or it is too thick which will cause a lot of heat from the CPU. In this situation, you will have to remove the existing thermal paste from both parts and apply new paste on both parts carefully without any bubbles in it.

If that doesn’t work then you can replace your stock heatsink with an upgraded one because some stock heatsinks are quite cheap and they do not provide good cooling for CPUs so make sure what kind of heatsink you using in your computer system because it is the only way to know whether it is good enough for your CPU or not.

What Does The CPU Fan Screw Into?

Almost every fan inside your computer case comes with screws so that it can be attached to the case or other components easily. You also need to make sure that all holes of the fan are matching perfectly with screw holes on its housing because if there is any mismatch then take help from someone who knows this type of work to attach screws through opposite sides of the fan and tighten them properly without damaging anything.

After attaching fans successfully, do not forget to plug the power supply into the wall outlet otherwise you will get a very late response while troubleshooting which will waste lots of time for you.

There are lots of things to consider before mounting a CPU fan which is mentioned above so follow this advice carefully and try to use your common sense while you are inside your computer case because it is not any rocket science.

How To Remove A Stuck Screw From A CPU Cooler?

How To Screw Into Your CPU Cooler

If you are unable to remove a stuck screw from your CPU cooler and it is causing some major problems for you then, first of all, try to heat the base of that screws with a soldering iron so that it can be loosened easily. 

If this method does not work then use some WD-40 spray on those screws and shake the computer case hard as well as upside down because this will help in removing any extra or weird pressure which is stuck inside those holes.

How Do You Get A Stuck Screw Out Of A Motherboard?

If you are removing screws from your motherboard then it is very important that you do this carefully because they can sometimes get stuck with the board itself or damage them completely. You should try to put the screwdriver on the flat edges of those screws and try to loosen them up carefully by moving sideways only.

If you are still unable to remove those screws then try to use a soldering iron on the backside of that motherboard and heat the bottom side properly with that soldering iron.

FAQs: How To Screw Into Your CPU Cooler (Screws are Stuck!)

I Am Trying To Attach The CPU Cooler To My Motherboard But Screws Are Stuck With The Heatsink! What Should I Do?

If you are unable to remove a stuck screw then heat the base of that screws with some soldering iron and shake your computer case hard as well as upside down while you are doing this.

How Do I Know Whether My Current CPU Cooler Is Good Enough For My CPU Or Not?

You should check the temperature of your CPU while idle and also while heavy gaming. If it starts getting too hot after covering more than 3/4th of its temperature range then it means that your stock heatsink is not good enough for your CPU 

Otherwise, if it remains in the same temperature range while heavy gaming then your CPU cooling system is good enough for your CPU but you should still consider replacing it with a better one because there are lots of new and improved designs available which will keep your CPU cool even while gaming.

Conclusion

We hope you will not get a stuck screw in your CPU cooler ever again but if you do then use some soldering iron and shake your computer case while doing this. 

If these two methods did not work for you then take help from someone who knows this type of work or simply replace that screws because it is possible that they are badly damaged which might cause damage to the board as well.

If you have any further questions regarding how to attach CPU Cooler to the motherboard then let me know through the comments section below. Thanks for reading.

Also Read:
How To Fix A Asus Laptop That’s Overheating In 2022 – Quick Guide
How To Fix A Asus Laptop That Keeps Turning Off (Steps)

Reggie Burton is a technology expert with over nine years of experience in the field. He has worked extensively with both large and small businesses to help them optimize their tech infrastructure and improve their overall efficiency. Reggie is known for his calm demeanor and his ability to quickly assess a situation and find a solution. He is an invaluable member of any team, and his clients are some of the most satisfied in the business.

Leave a Comment