Why Does My Pc Turn On And Off After Installing Ram? (Solved)

Why Does My Pc Turn On And Off After Installing Ram? (Solved)

Why Does My Pc Turn On And Off After Installing Ram? (Solved)

A range of different components is packed into modern computers. This article will tell you why does my PC turn on and off after installing ram

Random-access memory, or RAM, is one of the most important parts of your PC, and it wouldn’t be possible for your machine to run without it. Learning how to upgrade the RAM is something that any PC user can do, and this process is incredibly easy once you know what you are doing.

This guide will show you how to install RAM and give you some pointers to choose the best upgrade for your computer. The computer is one of the most important devices in our lives. It can be used for many different purposes like shopping, playing games, watching movies, and even sending emails. 

But when we install ram on our computers, it will make our device more powerful. The RAM is basically a memory that stores data and information of the computer. If we have installed more ram in our computer then it will increase the speed of our computer.

What Is RAM?

Why Does My Pc Turn On And Off After Installing Ram?

If you want to understand what your PC’s RAM is doing, you have to explore it. A small built-in cache that isn’t able to store much data is what modern computer processors have. 

Random-access memory comes in. A form of temporary storage for data that can be accessed by your processor, RAM dramatically increases the rate at which your machine can perform operations.

The explanation is very basic and only scratches the surface of the role RAM plays in your PC. If you would like to learn more about random access memory in greater detail, we have an excellent article you can read.

How to Choosing Your RAM Upgrade

There are a few different factors to consider when shopping for a component like this if you haven’t already chosen your RAM upgrade. Not all RAM packages will work with your machine, so you need to be very careful with this.

DIMM Slot Compatability

The DIMM slots on your computer’s board hold your sticks of RAM. Over the years, there have been several generations of DIMM slots available, with the majority of modern motherboards being home toDDR4 DIMM slots. It’s important to make sure your slots correspond to the RAM you purchase because it’s not cross-compatible.

Motherboard Compatability

You need to consider the speed of the RAM you purchase, as well as the type of slots your motherboard has. This is measured in MHz, and you can find out which speeds your board game can handle inside its manual.

DIMM Slot Availability

There are four available RAM slots on most modern motherboards, though some will have as few as two and others will have eight plus. You have to choose a kit that will fit on the board you already have.

RAM Capacity

There are a number of different sizes of RAM kits. There is a limit to the amount of RAM that your board can use, but you don’t always need to reach it to maximize your performance. There is an article that can help you figure out how much RAM you actually need.

How To Install Or Upgrade RAM

Learning how to install ram is one of the easiest things you can do with PC hardware. Once you know what you want to do, the whole job can be completed within a few minutes. You can find a step-by-step process with images below that will show you exactly how to install RAM.

It’s important to keep safety in mind when working with computer hardware. You need to ground yourself if you want to touch anything inside your computer, but you also need to make sure your PC is unplugged. 

It is possible to achieve this by touching the outside of your power supply when it is plugged in or using an anti-static wristband as you go through the process. As you work on your machine, you should avoid touching components like the Capacitor.

Read Your Motherboard Manual

You can improve the performance of your machine by having it run in dual- or quad-channel modes when you have more than one stick of RAM in it. You will need to use the right DIMM slots to do this. 

The slots will usually be made from the same colored plastic to make it easier, but your manual will tell you which slots are connected like this. We will be using the slots shown in the next step when we install dual-channel memory.

Remove Your Old RAM (Optional)

If you already have RAM installed, you’ll need to remove it if you’re going to replace it with a RAM upgrade. Pressing down on the tabs at both ends of your DIMM slots will cause the sticks to come out.

Open Your DIMM Slots

You will need to open the DIMM slots before you can continue because most of the motherboards will be shipped with their slots closed. The small tabs at each end of your DIMM slots can be pressed down, and this is all you need to open them. 

You only need to do this at one end of your DIMM slot in some cases. Older form factors, like DDR3, will open at both ends, whileDDR4 memory only has one tab that can move. 

Line Up Your RAM

RAM can only be installed in one orientation and you need to line it up correctly before attempting to install it. There will be a small barrier inside the DIMM slot that will correspond with the contacts on your sticks of RAM to show you which direction to install it.

Insert Your RAM

When you have your RAM lined up, it will be time to put it into its slot. If you only have one open tab in your DIMM slot, you will need to put the RAM into the end that doesn’t open first. 

If your DIMM slot has more than one open tab, you will need to insert the RAM evenly. Once you have your RAM resting in the slot, you should push down on both ends of it until you feel a click and see the tabs close to secure it. 

It’s possible that you need to apply a bit of pressure to make the new motherboards feel good. If you notice that your DIMM slot is moving, you should stop and make sure that you followed the other steps correctly.

Boot Your PC Into the BIOS

It will be a good idea to make sure that your new RAM is working correctly once you have it installed on your computer. If you want to do this, you need to boot the machine and then enter your UEFI bios. 

The DEL and F12 are common examples of keys that you need to press to enter the bios on most PCs. Once the splash screen appears, you will need to press this key as soon as possible.

Check Your RAM Speeds & Add XMP

It is usually possible to find a System Information section within the computer’s BIOS. The speed that it is running and the amount of RAM that you have installed will be shown here. 

If you are running dual-channel memory, the speed will sometimes show as half of the actual speed it says on your kit, though this is nothing to worry about, you just need to make sure that your memory is running at the speed stated on the pack you have bought. You can follow the next step to fix the issue if the speed is slower than you were expecting.

Add an XMP Profile (Optional)

A RAM profile is a setting you use on your computer to control how much power it uses. A good profile will automatically change when your RAM changes so that it always runs at maximum speed.

You shouldn’t notice any problems with your PC once an XMP profile is added. You may need to choose a different profile to fix the issue if it starts to blue screen or has performance issues.

Adding More RAM To Your PC

One of the easiest improvements you can make to your PC is learning how to upgrade the ram on it. Depending on what you use your machine for, there may be a significant performance increase once this job is complete. There are many other improvements that you can make to your PC to further improve its performance.

How To Fix A PC That Turns On And Off After Installing RAM?

Why Does My Pc Turn On And Off After Installing Ram?

If you want to fix a PC that turns on and off after installing RAM, you can do these: reset the battery, replace the bad RAM sticks, check the right pair of RAM slots, upgrade the RAM Frequency, or Reseating the ram.

Replacing bad RAM sticks, checking the right pair of slots, and re-setting the battery are some of the things that need to be done. Follow the steps given below to fix a PC that turns ON and OFF after installing RAM:

Before attempting to reset the battery, remove the AC power supply and all the peripheral devices from the computer. Take the battery out of the computer after you remove the cover. The battery can be held in a horizontal position or connected through a wire. 

You need to note down the “+” and “” signs if it’s placed in the vertical position. The wire should be disconnected if the battery is connected to the holder. It takes two to five minutes to connect the battery. It will cause the battery to work again. 

Attach the devices and AC power supply to the computer cover to see if it works. You can check the RAM sticks for fault by testing them in different slots of your computer You can use a spare computer to test the RAM sticks.

If there are at least four RAM slots on the computer, the system works on a dual-channel principle. Only a certain combination of slots and channels can be used with the RAM sticks. The ram sticks to it when it’s installed in slot numbers one and two. You need to find the right dual-channel in your RAM slots in order to install the sticks. 

You might need to upgrade the RAM frequencies in your computer if you install more than your computer supports. If you press the keys in the owner’s manual, you will be able to enter the bios. The settings for the RAM can be found in the Advanced Chipset section of the bios. 

Depending on the amount of RAM installed in your computer, you can change the RAM Frequency. If you want to leave the setup, you must click the “Save and Exit” button.

To fix a RAM stick, just press it into its slot until it clicks. Once installed, it should work fine without any further action. The slots and the pins on the sides of the sticks have to be lined up together.

How To Fix A Computer That Won’t Turn ON After Installing RAM?

Cleaning the memory slots, replacing the bad RAM sticks, and enabling XMP are some of the things that can be done to fix a computer that won’t turn on after installing RAM. 

The board needs to be replaced with the XMS, and the memory slots need to be cleaned. To fix a computer that won’t turn ON after installing RAM, follow the steps given below.

Blowing compressed air can be used to clean the memory slots. There is dust in the slots that can cause a computer to not recognize the RAM. It is possible to find faulty RAM sticks by testing them in different systems. If you check the slots one by one, you will see which one is bad and the computer will not recognize it. 

If there are bad slots, you need to replace the motherboards. If you have installed more than you need, XMP may need to be enabled from the bios setup of your computer.

Tips When Installing New RAM

There are a few things that should be considered when installing a new RAM, like counting the number of slots and finding compatible ones. To find out if your operating system can support the maximum amount of RAM, the correct clock speed, and the specifications of the processor and graphics card, you should check.

Check the specifications of the RAM and match them with the specifications of the computer’s components. Find the right dual channels to install the RAM if you count the number of RAM slots in the computer. 

Installation of the wrong combinations of slots will cause issues such as the computer turning on and off multiple times. The operating system of your computer supports the maximum amount of RAM. It can lead to computers not starting if there is more RAM than what is supported. It’s a good idea to check the clock speed of your ram.

What To Do After Installing New RAM?

After installing new RAM, you need to connect all the cables, set the RAM Frequency, make sure the connections are firm, and so on. The main battery needs to be put back into the computer. The AC and other cables need to be connected the same way as the original connection. 

If you have installed more or less RAM than the required amount, you should set the RAM Frequency. It is advisable to give the RAM time to adapt to the working of your computer. 

The computer needs to be checked to see if it boots or not. If it does not, you can try cleaning the slots to get rid of any dust. To make sure the connections are appropriate, make sure they are firm and appropriate.

Conclusion

The XMP status of your computer, the maximum level of supported RAM, the conditions of RAM slots and RAM sticks, and so on are some of the factors that should be considered when installing new RAM in your computer. It is important to choose the right dual channel for the computer to boot up and for the RAM sticks to be identified by the computer.

If your computer doesn’t boot up after installing new RAM, you need to check the RAM sticks to make sure they are seated correctly, identify the faulty RAM sticks or RAM slots, upgrade the RAM frequencies, and/or enable XMP. 

The right slots are where the RAM sticks should be installed. We hope that this article helped you gain all the information you needed to know Why Does My Pc Turn On And Off After Installing Ram? (Solved) thanks for reading!

Also Read:
Why Is My HP Laptop Slow? (SOLVED) – Simple Guide In 2022
How To Fix A Asus Laptop That Keeps Disconnecting From Wi-Fi
Why Is My Acer Laptop So Slow? (Troubleshooting Guide 2022)

Reggie Burton is a technology expert with over nine years of experience in the field. He has worked extensively with both large and small businesses to help them optimize their tech infrastructure and improve their overall efficiency. Reggie is known for his calm demeanor and his ability to quickly assess a situation and find a solution. He is an invaluable member of any team, and his clients are some of the most satisfied in the business.

Leave a Comment