In this blog post, we will clear out this question “why does my refrigerator keep tripping the circuit breaker?” Stay cool! Your refrigerator is one of the most important pieces of equipment in your kitchen and if it breaks down then it will affect your kitchen life in a big way.
It’s the middle of summer and your refrigerator just keeps tripping the circuit breaker. You’ve tried everything, but you can’t seem to fix the problem. Before you call a repairman, there are a few things you can try yourself.
There are so many reasons why your refrigerator will keep tripping the circuit breaker. These days, refrigerators are very common in homes and people use them for storing food.
They are also used for storing drinks and other things. But sometimes these things happen and you don’t know what to do next. If you are going through this issue, then you need to know how to fix a refrigerator circuit breaker.
- What Is The Circuit Breaker?
- How Come My Fridge Keeps Tripping The Circuit Breaker?
- Troubleshooting Refrigerator Circuit Breakers
- Why LG Refrigerator Trips The Circuit Breaker
- Check The Wiring Connecting The Refrigerator
- Test The Refrigerator’s Defrost Heater
- 1 What Is The Circuit Breaker?
- 1.1 How Come My Fridge Keeps Tripping The Circuit Breaker?
- 1.2 Troubleshooting Refrigerator Circuit Breakers
- 1.2.1 Inspect The Power Cord
- 1.2.2 Inspect The Power Cord’s Prongs
- 1.2.3 Fix A Tripped Circuit Breaker On A Refrigerator
- 1.2.4 Check To See If Circuit Overloading Is The Problem
- 1.2.5 Circuit Breaker Tripped By Samsung Fridge
- 1.2.6 Examine The Outlet For Anything Out Of The Ordinary
- 1.2.7 Examine The Breaker Box
- 1.3 Why LG Refrigerator Trips The Circuit Breaker
- 1.4 Check The Wiring Connecting The Refrigerator
- 1.5 Test The Refrigerator’s Defrost Heater
- 1.6 Conclusion
What Is The Circuit Breaker?
A circuit breaker is a device that helps to prevent your appliances from overloading the power supply. When the electricity gets overloaded, the circuit breaker turns on and off so that the power supply can be used again.
If your refrigerator trips the circuit breaker, then the power supply is getting overloaded. So, it is better to switch off the refrigerator and try to fix the issue yourself.
How Come My Fridge Keeps Tripping The Circuit Breaker?
An overloaded circuit, short circuit, or too much current being passed through can cause a refrigerator to trip the circuit breaker.
You must first understand what goes on in the electric circuit to understand why your refrigerator might cause your circuit breaker to trip multiple times. A circuit breaker is a device that stops power or electricity from going up. It’s indicative of something wrong with the entire circuitry.
Figuring out the root cause of the problem and fixing it will help you save the essentials in your life as the underlying problem may lead to bigger problems like fires or electrocution.
When there is too much demand for power on the circuit, it can cause overloading. It means that there is an overload of Amps traveling through the same route. If you have a residential code like that, you may need to fix the Amps running through the same route.
If more than recommended flow or try to flow within the circuitry, it can lead to the circuit becoming overheated and damaged by a power surge. Fire damage can be inflicted on the wiring and connected appliances.
A short circuit can happen when a wire that has current flowing through it comes in contact with the wire that is neutral and serves as a return conductor in the circuit.
When the two wires come in contact, there is an increase in electricity that can generate heat. There is a burning odor or charred ends of the wiring. A short circuit is usually accompanied by it.
Ground Fault Surge
When the path of the current that is running via the hot wire gets unrestricted access to the ground, huge amounts of current can cause a ground fault surge. The overheating can cause the area around the outlet to be discolored.
Troubleshooting Refrigerator Circuit Breakers
Whenever you attempt to fix anything remotely related to electricity and power, make sure to take all safety precautions. Before calling an electrician, you should go ahead and do certain repairs if you are comfortable with basic electrical problem-solving.
An electrician will do a more thorough and professional inspection. He/she will be able to find the solution to the problem. The refrigerator doesn’t necessarily have to cause the circuit breaker to trip.
In reality, something else may cause it to happen, and you may think that it is because of it. The amount of time needed to fix the circuit breaker problems will depend on the problem you discover. The following are some of the basic methods that can be used to fix refrigerator circuit breaker problems.
Inspect The Power Cord
The first step towards discovering the problem is, to begin with. A damaged refrigerator cord can lead to short circuits, which in turn lead to circuit breakers tripping. Don’t leave the cord unattended, inspect it visually. The power cord should be inspected to see if there are any of the following.
There are worn-out wires, protective insulation, and visibility of animal-inflicted damage. If any of the indicators come into play, you should replace the power cord. You may be able to find recommendations for fixing the wiring using a tape safe. Replacing the wire is the best option since using electrical tape is not a viable fix.
Inspect The Power Cord’s Prongs
The power cord of your refrigerator should be inspected carefully. If the power cord is rusty, loose, and/or damaged, you should check it out. If this is the case, you could be in a situation where there are frequent power surges in ground fault situations.
A ground fault surge can happen when the hot wire comes near the ground wire. Two cases can cause overheating, fires, and other problems. You may have to replace the entire wiring or just the ends to fix this.
Fix A Tripped Circuit Breaker On A Refrigerator
It is possible to fix a refrigerator that is tripping the circuit breaker. If the problem is beyond your knowledge, you might have to call a professional electrician to help. Some of the ways you can fix this problem can be found here. The following are what they are as follows.
Check To See If Circuit Overloading Is The Problem
An overload of a circuit can cause a problem and cause the circuit breaker to trip. If you use the same circuit for in-demand appliances, overloading the circuit can cause the circuit breaker to trip.
This becomes an even bigger problem when the compressor starts up. If you want to fix this, keep the refrigerator on a different outlet so that it becomes part of another circuitry.
All high-demand appliances have to be unplugged from the circuit. Plugging it in a different room might fix the problem. If it runs smoothly without tripping on the new circuit, and there is still a problem of circuit breakers tripping, you need to find out which appliance is at fault. These appliances need to be eliminated from that particular circuit.
Circuit Breaker Tripped By Samsung Fridge
The first thing you have to do is start with the methods mentioned above.
It is a good idea to check the power cord. The power cord’s prongs have to be inspected. If overloading is the problem, check to see if it’s the problem. If overloading is the case, install a dedicated circuit and see if the problem persists.
If the problem persists after you have done all of the above steps, try out the following. While you complete the following on your to-do list, make sure that the power is disconnected.
Examine The Outlet For Anything Out Of The Ordinary
Check the power outlet to see if there is any damage if you are checking for overloading in circuitry. It is the place where you plug in the fridge power cord. The cover of the receptacle should be detached. If there is any damage, unfastened or charred ends, you should look at it.
There are a lot of predicaments like ground faults, overheating, and short circuits that can be caused by faulty wiring. You should replace the outlet if there is any visible damage.
With the help of an ammeter, you can test the wires. Take the help of a professional electrician if you don’t know what to look for in an electrical problem.
Examine The Breaker Box
If there is no damage to the outlet of the box enclosing the circuit breaker, you must check to see if there is a problem with the box enclosing the circuit breaker.
Circuit breakers can be vulnerable to damage and depreciation over time. They can lose their quality because of water and pests. If there is anything that looks even slightly loose, burnt, discolored, or corroded, then you will have to replace the circuit breaker. The electrician should be contacted for the same.
Why LG Refrigerator Trips The Circuit Breaker
Check for an overloaded circuit, inspect the power cord and its prongs, examine the circuit breaker box, and look at the outlet in the case of a fridge tripping the circuit breaker. If you don’t see a solution that works for you, you can check out the following methods to fix it.
Check The Wiring Connecting The Refrigerator
The refrigerator should be away from the wall if the power cord is disconnected. Carefully unfasten the paneling on the back of the vehicle. The back is a good place to look for damage or lose wires. If you don’t notice anything, then try the next method.
Test The Refrigerator’s Defrost Heater
Sometimes the internal component’s failure can cause the circuit breaker to trip. One of the most common parts that cause circuit breakers to trip is the defrost heaters.
Replacing it won’t make you have a burden on your pocket. You can easily replace it because it is relatively cheap. It’s possible to fix it by restarting the defrost timer.
The beginning of a new defrost cycle will be prompted by this. There is a problem with the circuit breaker if you face it immediately after the beginning of the defrost cycle.
- Water caused
- damage to the ground fault
- And short circuit insulation.
The circuit breaker on the Westinghouse refrigerator is tripping. If you don’t see any of the methods that work for you, you should look at the compressor.
After some time, the power surge load required to start the winding doesn’t stop even after the compressor window fails. The circuit breaker is forced to trip due to the overload caused by the extra current. The cost of these internal parts in a fridge is relatively high.
They range from 50 dollars to 300 dollars. The price can be affected by the make and model of the appliance. It’s a good idea to get it fixed by an electrician or appliance mechanic.
So, these are some tips that you can follow to prevent the refrigerator circuit breaker tripping problem. These tips will help you to fix the problem in no time. So, if you have any queries regarding this article then you can comment below.
These tips will help you to solve the problem. I have shared with you some effective ways to fix the problem. If you have any other problems then let us know through comments.
We hope that you got all the information you needed to know. Thanks for reading!