TV No Signal When HDMI Is Plugged In – Quick Guide In 2022

TV No Signal When HDMI Is Plugged In – Quick Guide In 2022

Do you ever wonder about “TV No Signal When HDMI Is Plugged In” . If so, don’t worry, we got you covered. Read this guide thoroughly so you don’t miss anything out!

If you’ve ever tried to connect your TV to an HDMI device and gotten the message “No Signal,” you’re not alone. This is a common issue that can be frustrating for many people. In this blog post, we will discuss some of the reasons why this might happen and how to fix it. Stay tuned!

You don’t have to worry if you can’t get a signal on your television or monitor after you establish a connection via an HDMI cable. You won’t be the last to experience this issue, and you are not the first person to do so.

When your TV says “no signal”, you probably think that something is wrong with your television set. But in reality, this is just a message that the TV is trying to tell you something important about your HDMI cable. 

If your TV or monitor doesn’t show a signal when you use an HDMI cable, it’s because you’re not getting any feed from the source that has been selected. This isn’t a serious problem and can be fixed without using the services of a paid expert.

What if there was a way to make your TV say “Hi, I’m a brand new TV!” when you plug it into your home entertainment system? Of course, this isn’t something that can happen overnight- and that’s exactly why it’s so important to get started today. We’re giving away a free HDMI adapter with every HDMI cable purchase from our online store!

Bad weather or malfunctioning hardware can cause your TV to have a no-signal issue. If there is heavy rain, snowfall, or winds at your location, the cable operator or streaming service provider will display a failure to receive the signal message. You don’t have to turn off the device until the signal comes back on.

Modern satellite dishes have been designed to deal with extreme weather. If you are convinced that there is nothing wrong with the TV hardware, the problem lies with one of its many connections. This guide will show you how to deal with the no-signal issue without spending a lot of money.

How To Fix HDMI No Signal

Six solution methods can be used to fix the problem. If you review the list of solution methods, you can find the best one that would fix the problem.

So follow the simple steps and connect HDMI to your TV correctly at first.

  • It’s possible to find the HDMI port on your TV. A minimum of one full-size HDMI port is required for the new generation TVs. If you have more than one HDMI port on your TV, then there must be HDMI 1, HDMI 2, and so on. The number one spot is where you’re going to plug your HDMI cable.
  • If you don’t have the right cable, you won’t be able to use it. Normally, TVs have the standard-sized HDMI port, which is the Type-A port, and 99mm X 35mm in size. If you need a different type of cable, make sure to check it out. There are two types of HDMI: The Mini HDMI and the micro HDMI.
  • To connect the end of the cable to the device, you must turn on the device. It’s important to make sure you are putting the cable in the correct place. If the other device’s port is damaged, you may not be getting a signal at all.
  • If your TV has more than one HDMI port, connect the cable security to the number one port, then turn on the TV.
  • You should now use the HDMI source on your television. Select the HDMI port if you want to trace the source or input button on the TV remote. If you can’t find the HDMI option, you have to try more than once. If your TV is getting a little longer to recognize the HDMI cable, this can happen. The right port number can be selected from the list. You should be able to see the device on your TV screen.
  • If you want to make sure the audio comes through the TV speakers correctly, then you need to set your device’s sound through the TV.
TV No Signal When HDMI Is Plugged In

Change The Input Source

The problem may be caused by selecting the wrong input source. It’s most likely that this will happen if you have more than one HDMI port on your television. The source of the sound should be the one you choose. 

Click on the input button on your TV remote to check the back of your TV for the same HDMI port you’re connected to, and everything should be solved.

Enable The HDMI Connection Settings

It’s possible that you won’t see a signal on your monitor or TV because the HDMI connection is not on the device. Before you try to establish a connection between the two devices, make sure the HDMI connection of the device you are connecting to is enabled.

Click on Settings on your TV remote, scroll to display entries, and locate the HDMI connection. If the HDMI settings on your TV are disabled, you can know it by doing this. The settings should be enabled if they are disabled by chance.

Update The Chipset Drivers and Graphics Drivers

If the graphics drivers are not up to date, you might have a signal problem on your screen when you connect with an HDMI cable. The use of Driver Easy will allow you to update the drivers.

The Driver Easy is an application that can be used to automatically update drivers. The stress, patience, and need for expertise will be eliminated thanks to this app. Drive Easy will identify the system of your device and find the correct drivers that will work with it without causing any harm.

There are two different subscription plans for the app. You can choose between the Pro version plan or the Free version plan. For efficacy, it is wise to settle for the Pro version plan.

How To Use Drive Easy

Go to your app store and download the Driver Easy application for your device. You should be able to run the app on your device once the download is complete. Clicking on the Scan Now button will show you on your screen. Your device will be scanned by the app to detect any problem.

The Update button needs to be pressed. It will download the correct version of the driver for your device, and you can have it installed manually. If you are using the Pro version, you will see Update All on the screen. The correct version of the missing drivers can be downloaded and installed through the app.

Unplug and Plug The Power Cable of The TV or Monitor

There are bugs in the television that could be to blame for the fault. There is a chance that a quick reset of the device will solve the situation. Plug the television power cable back in after you leave it for a few seconds, you don’t have to do anything else.

Unplug all HDMI Sources and Reconnect Them

If your television has more than one source, you may try this solution method. There is a possibility of a fault in any of the HDMI ports. Plug the HDMI cables back into your device carefully and adequately and you’re good to go.

Reset The TV

This is the last solution method that should come to mind when you encounter this problem. bugs on the device could be to blame for the inability of the television to find a signal using the HDMI connection.

The television may not be able to be booked to solve this problem. You may have to reset the entire Television system. It is important to note that doing a factory reset of the television will result in the loss of settings and information stored on the television. You may need to back up the device before doing the reset.

What Exactly Is a “No Signal” Problem?

Most TV manufacturers have an auto-connection mechanism that allows the device to be detected and displayed on the screen as soon as you turn on the remote.

There is a network reception issue if your TV says no signal even though it is set to the correct source or input as the cable box. If you want to power off the TV, wait for a few minutes and then restart, you can do it first. If the problem continues, you will need to look at the individual connections one by one. It is a very simple process of elimination.

If you want to use one of the HDMI ports of the TV to connect to a laptop or any other screen-sharing device, you need to disengage them first.

TV No Signal When HDMI Is Plugged In

No Signal When Connected to Windows 10

There are several reasons why you might get the No Signal message when trying to connect your TV to Windows 10

There are a few things you can try on the Windows software side that isn’t covered in the hardware guide. You have to hit Win + P on your keyboard before you can select Extend, duplicate, or Second Screen Only. The picture should appear if one of these is present.

If that doesn’t work, then you need to make sure you’re connected to the right port on your computer. If you have a connected graphics card, the HDMI port on your board will be disabled automatically.

If you want to re-enable the HDMI port on the board, you can either right-click the desktop and switch there, or you can use the port on the graphics card.

TV No Signal When HDMI Is Plugged In

Check the Cable Box/Set-Top Box

Your set-top box may be the reason for a no-signal issue. If you use an HD box, the provider could release new firmware and update it in the background. New satellite settings have been uploaded, but the device has not been fully integrated with the adjustments

Plug the power cable into it again to solve the issue. It’s a good idea to make sure the TV isn’t on. You might want to let the cable box cool for a while and pull out the smart card. Don’t put a lot of pressure on yourself. Reinsert the card with the chip facing downward after seeing any visible arrows.

HDMI Cable/Port Issues

Most of the time, the reason for a no-signal problem can be traced to either the High-Definition Multimedia Interface (HDMI) cables or the ports. There might be slight damage to the ports if the connections are not tightly fitting. You can simply migrate to an alternative HDMI port if your TV mechanic can’t fix it.

Remove the HDMI cable from the old or new port and put it in the old port. If you want to stay in the port position, you might want to upgrade your HDMI cable to a self-locking one. You should be able to get your TV signal to work again once you sort out the HDMI issues.

HDCP Errors

The High-Bandwidth Digital Content Protection (HDCP) error is a problem where your TV may run into it. The anti-piracy measure suggests that non-licensed devices should not be receiving cable TV content. The majority of modern TV sets have to be HDCP- compliant.

HDCP errors will cause the no-signal message to show up if you try to connect a Kodi box to your cable TV with a higher definition display. The offending device will have to be removed to restore the connection.

Conclusion

Some TVs are smart enough to turn off the TV if they can’t receive the signal. Unfortunately, when people plug in the cable, they often don’t realize that they need to connect it to the correct port on the back of the TV.

The solution is simple: just plug in the HDMI cable. The problem is that many people don’t know how to do this. Many people plug in the HDMI cable but then they have no picture on their TV. This blog on “Why Does My TV Say “No Signal” when HDMI is Plugged in”? would help you with this issue.

Also Read:
Why Is My TV Stuck On One Channel? – Simple Guide In 2022
How To Fix A TV Screen That Is Too Dark (Steps) – Quick Guide In 2022

Leave a Comment