Why GPU Not Showing in Windows Device Manager (Solved 2022)

Why GPU Not Showing in Windows Device Manager (Solved 2022)

I was just browsing through my computer when suddenly I noticed that my GPU was missing from my device manager. If this happens to you too then this article on “why GPU not showing in Windows device manager” is just for you. 

I was completely taken aback by this because my computer had been running perfectly fine for the past few days. I tried searching online, but the results were very disappointing. 

All I found was a lot of people saying that the GPU would be listed in the device manager, but that wasn’t the case for me. I’ve been using computers for most of my life, so I knew that there was something wrong with my computer.

If you are facing issues in showing your GPU in the windows device manager, there is a problem with the driver of your graphic card. You need to check your graphic card driver version and update it if it’s outdated.

Why Does My GPU Not Appear In Device Manager?

Because of improper installation of the drivers, outdated versions of the drivers, or drivers set as hidden devices, your graphics card may not be showing up in the Device Manager.

Graphics cards not showing up in the device manager can be caused by drivers not being detected, incorrect bios settings, and disabled graphics cards. Improper installation of outdated drivers is located as hidden devices. There is a graphics card that is disabled.

An Improper Installation

Hard drive space issues, network issues, or battery problems are some of the reasons why the graphics card isn’t installed correctly on your computer. The graphics card doesn’t show up in the Device Manager when this happens. The only way to solve this is to uninstall the drivers and then download and install them again.

Outdated Drivers

The display drivers stop showing up in the device manager when the computer doesn’t automatically update them. The problem can be solved by uninstalling the drivers and installing them back with their latest versions. Downloads of the latest drivers can be found on the official website of the graphics card manufacturer.

Devices That Are Hidden

The display drivers may be located on your computer. They do not show up in the Device Manager. Simply opening the device Manager window can be used to solve this problem. Clicking on the View menu will take you to the “Show Hidden Devices” context menu.

Drivers Not Detected

The graphics card doesn’t detect drivers when it’s not properly fitted in the slot of your computer. The drivers don’t show up in the list of display adapters in the “Device Manager” window. To fix this problem, you will need to remove the graphics card, blow some air into the slot to remove the dust, and fit the card back into the slot.

Incorrect BIOS Settings

When using a single monitor, the bios settings may be set to allow the working of the graphics card on more than one monitor. If you want the graphics card to show up in the “Device Manager” window of your computer, you need to change these settings and update the BIOS.

The Disabled Graphics Card

The graphics card is disabled most of the time on the computer. It doesn’t show up in the list of graphics drivers in the “Device Manager” window To enable it, you need to right-click the name of the driver you want to enable and choose the “Enable” option from the context menu. 

Where Can I Find The Missing Display Graphics Driver In Device Manager?

Why GPU Not Showing in Windows Device Manager

If you add the “add hardware” option to the action menu of the device manager, you can get back the missing display drivers. You will have to do this to make your computer detect and install the missing drivers.

You can get the missing drivers back in the “Device Manager” window of your computer by following the steps given below.

  • You can type the device manager in the search bar if you click the “Start” button. 
  • The “Device Manager” window should be opened by pressing “enter”
  • You can add legacy hardware by clicking on the “add Legacy Hardware” option from the list. 
  • On the screen, there will be an add hardware wizard.
  • Click the “Next” button and then select the “Install the hardware that I manually select from a list (Advanced)” option. 
  • Click the next button to continue. Click the “Next” button if you don’t want to select the “Display Adapters” option from the list. You can retrieve the display driver by selecting the manufacturer and model that you want. 
  • Click the “Next” button to move on. The next window has a button called the “Next” button. The hardware will be added to the computer by the computer. The wizard will indicate the completion of the process if you click the finish button.
  • You can change the name of the hardware by clicking on the “Update” option. Click on the “Browse my computer for drivers” option to open the new window. Click on the option that says “Let me pick from the list of available drivers on my computer“. 
  • Select the manufacturer and model of the display graphics drivers from the list and click the next button. Once the installation is complete, click the “Close” button to shut down your computer.

What Is The Process For Adding A Graphics Card To Device Manager?

The new hardware can be manually added to the Device Manager by using the “Control Panel”. Most of the time, the computer can’t detect the new drivers automatically, so you may need to do this.

The instructions in the manufacturer’s manual are what you need to install the new graphics card on your computer. 

  • Click the “Start” button if you want to start your computer. 
  • You can add new hardware by clicking the “Control Panel” option and selecting the “Add New Hardware” option in the Control Panel Window. 
  • Click the “Yes, I have already connected the Hardware” option if you want to open a new window.
  • You can add a new hardware device by clicking on the “Next” button. 
  • Click the “Install the hardware that I manually select from a list” option and you will be taken to the next page. 
  • Click the “Next” button if you want to select the “Display Drivers” option from the list. 
  • Click the “Have Disk” option if you don’t want the display drivers to be manually chosen. You can find the location where the drivers are located on your computer. 
  • Click the “OK” button if you don’t want to do it anymore. The display drivers will be installed automatically once this is done. It’s a good idea to restart your computer when the installation is complete.

In Device Manager, Where Is The Gpu?

The graphics card is located in the “Device Manager” under the “Display Adapters” section. You can see the graphics card listed in the context menu if you click on the downward arrow. 

You can enable, disable or uninstall the graphics card by right-clicking the name of the graphics card and selecting the option. At the same time, both enable and disabling options will not be available. If you need to update the driver, you can do that.

In Windows 10, How Do I Enable My Graphics Card?

To enable your graphics card in Windows 10, you need to go to the “Device Manager” on your computer. You must enable it because you may be having problems with your computer graphics due to a disabled graphics card. 

Some games may not run at all because of it. The graphics card can be enabled by following the steps given.

  • The keys for Windows and X should be pressed at the same time. The menu that appears on the screen has the name “Device Manager” written on it. 
  • Go to the list of devices and find your graphics card, then double-click on it to open the Properties window. 
  • You can enable the graphics card on your computer by clicking on the button marked “Enable Device” in the drivers’ tab. The graphics card may be already enabled on your computer if you do not see this option.

Windows 10 Does Not Detect My Nvidia Gpu?

Your graphics card may not be detected by Windows 10 if the drivers are not detected or if you install the wrong graphics driver. If you follow the steps given below, you can fix the problem of the NVIDIA GPUs not being detected by Windows 10.

The drivers should be reinstalled manually when the hidden devices are opened. If you are an administrator, open the “Command Prompt” window to do this. Press the “enter” key if you want to type “set dev mgr show non-present devices”

Press the “enter” key again if you want to type “start MSC”. The “Device Manager” window will be opened by this. If you want to show hidden devices, click the “Show hidden devices” option from the menu. 

This will show the devices that aren’t connected to the computer at all. If you want to uninstall the drivers of your graphics card, right-click on their names and select “Uninstall device” from the context menu. After you uninstall the drivers, restart your computer to download the drivers. It will be possible for Windows 10 to detect the graphics card.

Is The AMD GPU Missing From The Device Manager?

Why GPU Not Showing in Windows Device Manager

If there is an improper connection, an outdated graphics card, or a hardware problem, the graphics card may not be in the “Device Manager” of your computer. 

If you want to fix this, you can uninstall the graphics drivers and download the latest version from the manufacturer’s website. 

  • You can uninstall the graphics driver by pressing the “Windows” key and typing in “Device Manager” in the “Search” bar. 
  • Right-click the model of the graphics card installed on your computer and choose the “Properties” option from the menu. 
  • Go to the Driver tab and click on the “uninstall device” button. To uninstall the driver, select the “Delete the driver software for this device” option, and then click the “Uninstall” button. Repeat the above steps for all the drivers.

Cancel the automatic attempt of the computer to install the drivers if you restart your computer after the uninstallation of the drivers. 

  • To download the drivers for your graphics card, go to the official website of your graphics card provider. 
  • Go to the properties and right-click the setup file for the driver. 
  • The program can be run in compatibility mode if you click on the “Run this program in Compatibility mode” button. 
  • The operating system you choose will be displayed in the drop-down menu. The driver is going to start installing on its own. It’s a good idea to let it install completely and check its function after a while.

How Come My GPU Is Not Detected In BIOS?

When you change the settings on your computer, the graphics card may not be detected by the computer’s BIOS. To fix this, you will need to change the settings in your computer’s BIOS to make sure the problem doesn’t persist. The steps that you will need to take are listed here.

  • Your computer needs to be turned on. 
  • Pressing the Esc or F8 key as soon as the computer starts will allow you to enter setup. 
  • It’s important to identify the right button because it is different from manufacturer to manufacturer. 
  • You can choose the BIOS menu from the list of options by using the arrow keys on your keyboard. You can enter by pressing the “Enter” key.

It is possible to find the setting for “IGPU Multi Monitors”. If you are using a single monitor, disabling this option is not necessary. The setting for “PCI” or “PCI-e” should be found here. There are several options, like “PCI”, “Onboard”, or “Onboard Backup”. If the problem persists, select one option at a time and see if it works.

Conclusion

I hope you liked this post about “Why GPU Not Showing In Windows Device Manager”. I have also shared with you some useful tips which will help you to fix this problem. 

I hope this post helped you to know about the problem and its solutions. I am sure you will love the solution and you follow the instructions correctly. 

Also Read:
Why Is My Acer Laptop So Slow? (Troubleshooting Guide 2022)
How To Fix A Blinking Laptop Power Button (STEPS) 2022

Leave a Comment